Electro Harmonix Op Amp Big Muff and another Lovepedal Purple Plexi 800

Hey everyone. After a crazy few months of starting a new job I’m finally back to building pedals. Today we’re going to look at one of my favourite variations of the Big Muff as well as my (current) favourite Marshall-in-a-box pedals with a few surprises along the way.

I think the Op Amp Big Muff is my favourite because of its uniqueness. Instead of the usual 4 transistors this version features two small IC chips. Well how does that affect the sound you ask? Personally I think it provides the muff with a bit more gain and mids, both of which are wanted in my opinion. I built this pedal almost a year ago, but I thought I’d like to revisit it as I recently found out that the Op Amp muff was used by Billy Corgan on the Smashing Pumpkins’ album Siamese Dream. Here’s what mine turned out to look like:

I stole that graphic from a Middles Ages textbook that I have kicking around for some odd reason. The uneven surface texture on the enclosure is a result of a brass brush on a dremel, and the font is the same font used on older Big Muffs. It all makes the pedal look somewhat “Doomy” but I like it.

You’ll also notice a little toggle switch near the top of the pedal. That’s the tone-bypass switch, which was a stock feature on the 1978 Muff. Basically it takes the tone control circuit out of the pedal and provides you with a less-fizzy more middy sounding muff, which I find cuts through the mix of a band.

On to the PP800. I built this for a friend in Montreal. He requested a modification to enhance the bass response. Going back to my training in pedal-building 101 I experimented with changing the value of the input capacitor to fine-tune the amount of bass response I was able to get two values that really work both for single coils and for humbuckers. Here’s a few pics of the completed build.

Improved PP800

The enclosure looks much more purple in person. After using a very nice DSLR at work I’ve decided to upgrade from a crappy cell phone camera to something more legit. If you have any camera recommendations please let me know!

I finished the pedal with Silver Marshall knobs and a frosted white LED.

Finally, here’s a a little tip when building a PP800. I’ve noticed that quite a few people’s clones have a very annoying high pitched squeal when the gain is turned up to 11. My solution to this problem is to replace the 10R resistor connected to lug 3 of the gain pot with one of a slightly higher value. I use a 47R resistor in its place and I get none of that squeal, even at higher gain and volume settings.

Next up will be a pair of KLONES and a Tube Screamer of some sort. Stay tuned!

  1. Thank you for sharing this terrific post. My company is always enhanced with checking out other like minded ideas and info

  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: